Standard demountable rounded-edge tables (TAC, TACEG, TAD and TADEG range)

The standard demountable rounded-edge tables are designed for professional kitchens and demanding large-scale catering environments. Thanks to their stainless steel construction with rounded edges, they provide a robust, hygienic workstation suited to intensive use.

Technical specifications

• AISI 304L stainless steel top: 15/10 thickness AISI 304L stainless steel worktop, reinforced with a glued 19 mm water-repellent melamine panel.
• Rounded edges: 20 mm front radius, 60 mm downstand and welded corners for a finish suited to professional kitchen requirements.
• Inclined backsplash (Refs TAD-TADEG): 30° rear backsplash, 100 x 20 mm, with a 10 mm radius at the base.
• Central version (Refs TAC-TACEG): table without backsplash, suitable for island layouts or preparation areas accessible from both sides.
• Demountable base: Ø 38 mm stainless steel tube legs, demountable, with Turn’Fix system for quick and secure tool-free assembly.
• Working height: standard height 900 mm.
• ABS adjustable feet version: ABS feet adjustable over 30 mm, with a total admitted load of 150 kg evenly distributed.
• Polyamide castor version: Ø 125 mm swivel castors, 2 with brakes and 2 without brakes, with a total admitted load of 100 kg evenly distributed.
• Standard formats: 600, 700 and 800 mm widths according to catalogue references. Standard lengths go up to 2200 mm depending on width, with a 2400 mm length available in 700 mm width.

Product benefits

• Enhanced hygiene: rounded edges, welded corners and stainless steel surfaces designed for professional cleaning.
• Fast assembly: thanks to the Turn’Fix system, the legs can be fitted without tools.
• Multiple configurations: available as central table, with lower shelf, with backsplash, or with backsplash and lower shelf.
• Choice of mobility: ABS adjustable feet or polyamide castors depending on operational needs.
• Large kitchen design: a rounded-edge range developed for demanding professional environments.

Available options

• Table configurations (TAC, TACEG, TAD, TADEG): central table, central table with lower shelf, table with backsplash or table with backsplash and lower shelf.
• Stainless steel adjustable feet (…/X): option to add 4 stainless steel adjustable feet to the reference.
• Stainless steel adjustable feet for lengths over 2200 mm (…/X): option to add 6 stainless steel adjustable feet to the relevant tables.
• Stainless steel castors (…/RX): option to add 4 Ø 125 mm stainless steel castors, including 2 with brakes.
• Stainless steel castors for lengths over 2200 mm (…/RX): option to add 6 Ø 125 mm stainless steel castors, including 2 with brakes.
• Polyamide castors (…/RP): option to add 4 Ø 125 mm polyamide castors, including 2 with brakes.
• Polyamide castors for lengths over 2200 mm (…/RP): option to add 6 Ø 125 mm polyamide castors, including 2 with brakes.
• Polyamide semi-mobile option (…/SMP): option to add 2 polyamide castors without brakes and 2 ABS adjustable feet.
• Stainless steel semi-mobile option (…/SMX): option to add 2 stainless steel castors without brakes and 2 stainless steel adjustable feet.
• Special-height legs (…/SPHT): option available for standard tables, for worktop height up to 1050 mm maximum; the required equipment height must be specified when ordering.
• Lower crossbars (TRAV): lower side and longitudinal crossbars, U-shaped or H-shaped to be specified when ordering.
• Welded legs (SPSOUD): option to weld the 4 legs to the support rails.
• Rear backsplash closure (TFD): rear backsplash closure available as an option.
• Right add-on side backsplash for 600 mm width (TTDR610AD): welded and siliconed add-on side backsplash, open at the rear.
• Left add-on side backsplash for 600 mm width (TTDR610AG): welded and siliconed add-on side backsplash, open at the rear.
• Right add-on side backsplash for 700 mm width (TTDR710AD): welded and siliconed add-on side backsplash, open at the rear.
• Left add-on side backsplash for 700 mm width (TTDR710AG): welded and siliconed add-on side backsplash, open at the rear.
• Rear stops (TTBA2): 2 AISI 304L stainless steel tube rear stops, with black ABS end caps and 35 mm space between backsplash and wall.
• Corner stops (TTCPC4): set of 4 rubber corner stops fitted to the table corners.
• Rubber scraper/flap (OPBAV): rubber scraper or flap fixed to the table for clearing plates.