Standard rounded-edge chef’s cabinets (MH2 and MH3 range)

The standard rounded-edge chef’s cabinets are designed for professional kitchens requiring an enclosed stainless steel workstation with an integrated sink bowl. Thanks to their AISI 304L stainless steel top, suspended sliding doors and rounded-edge construction, they meet the requirements of large-scale catering environments.

Technical specifications

• AISI 304L stainless steel construction: cabinet made from AISI 304L stainless steel, suitable for professional kitchen use.
• AISI 304L stainless steel top: 15/10 thickness top, reinforced with a glued 19 mm water-repellent melamine panel.
• Rounded edges: welded corners, 20 mm front radius and 60 mm downstand for a finish suited to demanding professional environments.
• Inclined backsplash (Refs MH2-MH3): 30° inclined backsplash, 100 x 20 mm, closed at the ends.
• Integrated stainless steel sink bowl: welded stainless steel bowl measuring 400 x 400 x 250 mm.
• Sink bowl position: models available with right-hand or left-hand sink bowl depending on the reference.
• Partial rear panel: cabinet with rear open over 2/3 to allow plumbing access.
• Sliding doors: 2 suspended sliding doors with integrated handles and lock.
• Interior layout: cabinet supplied without internal shelf.
• Drainage equipment included: supplied with waste fitting, simple overflow tube and plastic trap.
• Tap hole: Ø 31 mm tap hole provided, with tap hole cover available as an option.
• Standard base: black composite feet, 155 mm high, adjustable by +70 mm.
• Standard dimensions: 700 mm width, 900 mm height, available lengths from 1200 to 2000 mm depending on the reference.
• Non-lined version (Refs MH2): weight from 48 to 72 kg depending on length.
• Version with lined doors and side panels (Refs MH3): weight from 59 to 89 kg depending on length.

Product benefits

• Complete workstation: stainless steel cabinet with integrated sink bowl for professional kitchen preparation.
• Enclosed storage: suspended sliding doors with lock to organise the workstation.
• Optimised hygiene: rounded edges, welded corners and AISI 304L stainless steel top.
• Easier plumbing access: partial rear panel open over 2/3 for a more practical installation.
• Choice of finish: non-lined version or version with lined doors and side panels depending on requirements.

Available options

• Stainless steel feet, 155 mm high (…/X): option to add 4 stainless steel feet to the reference.
• Stainless steel Ø 125 mm castors (…/RX): option to add 4 stainless steel castors, including 2 with brakes, to the reference.
• Interior layout (POPT16): surcharge for interior layout including a lower shelf and a partition.
• Chrome tap hole cover (CT50): chrome tap hole cover available for the tap hole.