Bespoke Tradition central tables and tables with backsplash (TFNC, TFNCE, TFND and TFNDE range)

Bespoke Tradition central tables and tables with backsplash are designed for professional kitchens requiring a rigid, welded all-stainless steel table adapted to layout constraints. Available as central or wall-side versions, with or without a welded lower shelf, they meet the needs of preparation, plating and workstation organisation.

Technical specifications

• All-stainless steel construction: stainless steel top and base for intensive professional use.
• Reinforced top: brushed stainless steel sheet top, 15/10e thickness, stiffened and soundproofed by a water-repellent melamine panel.
• Welded structure: structure reinforced by a welded stainless steel perimeter frame.
• Base: 4 legs or 6 stainless steel tube legs above 2000 mm, offset from the wall to allow pipework to pass through.
• Levelling: tables mounted on levelling feet.
• Lower reinforcements: welded rear lower brace and spacers.
• Working height: adjustable height from 885 to 910 mm.
• Available widths: 600 or 700 mm.
• Bespoke lengths: length ranges from 600 to 2900 mm.
• Central versions: tables without backsplash available plain or with welded lower shelf.
• Backsplash versions: 100 x 20 mm flat backsplash closed at the ends, available plain or with welded lower shelf.
• Central references, 600 mm width: TFNC6-10 to TFNC6-29 for plain tables, TFNCE6-10 to TFNCE6-29 for tables with lower shelf.
• Central references, 700 mm width: TFNC7-10 to TFNC7-29 for plain tables, TFNCE7-10 to TFNCE7-29 for tables with lower shelf.
• Backsplash references, 600 mm width: TFND6-10 to TFND6-29 for plain tables, TFNDE6-10 to TFNDE6-29 for tables with lower shelf.
• Backsplash references, 700 mm width: TFND7-10 to TFND7-29 for plain tables, TFNDE7-10 to TFNDE7-29 for tables with lower shelf.

Product benefits

• Bespoke adaptation: length ranges up to 2900 mm to meet layout constraints.
• High rigidity: welded structure, stainless steel perimeter frame and stainless steel tube base.
• Choice of layout: central version for access from several sides or backsplash version for wall installation.
• Integrated storage: versions with welded lower shelf to optimise storage under the worktop.
• Easier technical installation: legs offset from the wall to allow pipework to pass through.

Available options

• 4 stainless steel Ø100 mm castors, including 2 with brakes (…/RX): option to be added to the end of the reference.
• 6 stainless steel Ø100 mm castors, including 2 with brakes (…/RX): option to be added to the end of the reference for 6-leg tables.
• 4 polyamide Ø100 mm castors, including 2 with brakes (…/RP): option to be added to the end of the reference.
• 6 polyamide Ø100 mm castors, including 2 with brakes (…/RP): option to be added to the end of the reference for 6-leg tables.
• GN 1/1 telescopic drawer for 600 mm wide table (TITFN6): telescopic drawer with GN 1/1 x 100 mm stainless steel pan.
• GN 1/1 telescopic drawer for 700 mm wide table (TITFN7): telescopic drawer with GN 1/1 x 100 mm stainless steel pan.
• 5-level GN 1/1 rack (TFNRG1): stainless steel 5-level runner frame under the top, 325 mm entry, right-hand or left-hand side to be specified.
• 5-level rack for 400 x 600 mm pastry trays (TFNR46): stainless steel 5-level runner frame under the top, 400 mm entry, right-hand or left-hand side to be specified.
• 3 GN 1/1 telescopic drawer block (TITFN37): drawer block with GN 1/1 x 150 mm stainless steel pans, for 700 mm wide Tradition table only, to be ordered at the same time as the table.