Bespoke demountable rounded-edge tables (TAC7, TACEG7, TAD7 and TADEG7 range)

The bespoke demountable rounded-edge tables are designed for professional kitchens requiring a robust, hygienic and adaptable stainless steel worktop. Thanks to their extended dimensional ranges, they can be adjusted to suit layout constraints.

Technical specifications

• AISI 304L stainless steel top: 15/10 thickness AISI 304L stainless steel worktop, reinforced with a glued 19 mm water-repellent melamine panel.
• Rounded edges: 20 mm front radius, 60 mm downstand and welded corners for a finish suited to demanding professional environments.
• Inclined backsplash (Refs TAD7-TADEG7): 30° rear backsplash, 100 x 20 mm, with a 10 mm radius at the base.
• Central version (Refs TAC7-TACEG7): table without backsplash, suitable for island layouts or preparation areas accessible from both sides.
• Demountable base: Ø 38 mm stainless steel tube legs, demountable, with Turn’Fix system for quick and secure tool-free assembly.
• Working height: standard height 900 mm.
• Bespoke width: width from 600 to 800 mm according to catalogue configurations.
• Bespoke length: available lengths from 600 to 2800 mm, with 4 legs up to 2200 mm and 6 legs from 2201 mm.
• ABS adjustable feet version: ABS feet adjustable over 30 mm, with a total admitted load of 150 kg evenly distributed.
• Polyamide castor version: Ø 125 mm swivel castors, 2 with brakes and 2 without brakes, with a total admitted load of 100 kg evenly distributed.

Product benefits

• Bespoke adaptation: wide choice of lengths to meet layout constraints.
• Enhanced hygiene: rounded edges, welded corners and AISI 304L stainless steel worktop.
• Tool-free assembly: thanks to the Turn’Fix system, installation is fast and secure.
• Multiple configurations: available as central table, with lower shelf, with backsplash, or with backsplash and lower shelf.
• Choice of mobility: ABS adjustable feet or polyamide castors depending on use.

Available options

• Table configurations (TAC7, TACEG7, TAD7, TADEG7): central table, central table with lower shelf, table with backsplash or table with backsplash and lower shelf.
• Stainless steel adjustable feet (…/X): option to add 4 stainless steel adjustable feet to the reference.
• Stainless steel adjustable feet for lengths over 2200 mm (…/X): option to add 6 stainless steel adjustable feet to the relevant tables.
• Stainless steel adjustable feet for semi-suspended table (…/X): option to add 2 stainless steel adjustable feet for a semi-suspended configuration.
• Stainless steel castors (…/RX): option to add 4 Ø 125 mm stainless steel castors, including 2 with brakes.
• Stainless steel castors for lengths over 2200 mm (…/RX): option to add 6 Ø 125 mm stainless steel castors, including 2 with brakes.
• Polyamide castors (…/RP): option to add 4 Ø 125 mm polyamide castors, including 2 with brakes.
• Polyamide castors for lengths over 2200 mm (…/RP): option to add 6 Ø 125 mm polyamide castors, including 2 with brakes.
• Polyamide semi-mobile option (…/SMP): option to add 2 polyamide castors without brakes and 2 ABS adjustable feet.
• Stainless steel semi-mobile option (…/SMX): option to add 2 stainless steel castors without brakes and 2 stainless steel adjustable feet.
• Suspended consoles (TOP16): surcharge for 2 suspended consoles on a bespoke table.
• Semi-suspended consoles (TOP17): surcharge for 2 semi-suspended consoles on a bespoke table.
• Lower crossbars (TRAV): lower side and longitudinal crossbars, U-shaped or H-shaped to be specified when ordering.
• Welded legs (SPSOUD): option to weld the 4 legs to the support rails.
• Rear backsplash closure (TFD): rear backsplash closure available as an option.
• 300 mm high rear backsplash (TOP12): high rear backsplash available per linear metre, minimum 1 lm.
• Integrated side backsplash (TDL): 100 x 20 mm side backsplash integrated into the worktop, according to the dimensional limits stated in the catalogue.
• Rear stops (TTBA2): 2 AISI 304L stainless steel tube rear stops, with black ABS end caps and 35 mm space between backsplash and wall.
• Corner stops (TTCPC4): set of 4 rubber corner stops fitted to the table corners.
• Rubber scraper/flap (OPBAV): rubber scraper or flap fixed to the table for clearing plates.
• 20/10 worktop thickness (TOP11): 20/10 worktop thickness instead of 15/10, subject to feasibility.
• Post cut-out (TOP01): specific cut-out for post clearance, subject to feasibility.
• Special corner cut-out (TOP02): special corner cut-out, subject to feasibility.
• Right-angle worktop cut-out (TOP03): right-angle cut-out in the worktop, subject to feasibility.
• Cut corner (TOP04): cut corner option, subject to feasibility.
• Corner post cut-out with backsplash (TOP05): specific cut-out with backsplash, subject to feasibility.
• Post cut-out with backsplash (TOP06): cut-out for table with backsplash, subject to feasibility.
• Vibratory polished finish for central table (TOP09): vibratory polished finish available per linear metre, minimum 1 lm.
• Vibratory polished finish for table with backsplash (TOP10): vibratory polished finish available per linear metre, minimum 1 lm.
• Raised waste-disposal hole (TTVDC): raised waste-disposal hole with rubber rim, internal diameter 165 mm.