Bespoke rounded-edge de-canning tables on legs (TAB range)

The bespoke rounded-edge de-canning tables on legs are designed to hold perforated gastronorm containers for draining canned goods. Thanks to their 304L stainless steel construction, pressed bowl and adaptable dimensions, they create a professional de-canning workstation suited to layout constraints.

Technical specifications

• 304L stainless steel top: 15/10 thickness 304L stainless steel top, reinforced with a glued 19 mm water-repellent melamine panel.
• Rounded edges: 20 mm rounded edges, 60 mm downstand and welded corners for a finish suited to professional environments.
• Inclined rear backsplash (Refs TAB): rear backsplash closed at the ends, 100 x 20 mm, inclined at 30°, with a 10 mm radius at the base.
• Pressed bowl: bowl designed to hold 2, 3 or 4 GN 1/1 gastronorm containers, with 215 mm depth.
• Model for 2 GN 1/1 containers (Refs TAB2): bowl dimensions 630 x 510 x 215 mm, available lengths from 1000 to 2600 mm.
• Model for 3 GN 1/1 containers (Refs TAB3): bowl dimensions 960 x 510 x 215 mm, available lengths from 1401 to 2600 mm.
• Model for 4 GN 1/1 containers (Refs TAB4): bowl dimensions 1290 x 510 x 215 mm, available lengths from 1801 to 2600 mm.
• Drainage: drainage positioned in the corner of the bowl, at the front on the worktop side.
• Worktop: right-hand or left-hand worktop able to receive a can opener, with 200 mm offset.
• Base: Ø 38 mm stainless steel tube legs, on adjustable feet with 30 mm adjustment, connected by 4 stainless steel rails.
• Number of legs: 4 legs up to 2200 mm length, then 6 legs from 2201 mm.
• Offset legs: design intended to allow can opener fixing.
• Tap hole: Ø 31 mm tap hole, with tap hole cover available as an option.
• Bowl position: bowl position to be specified when ordering.
• Overall dimensions: 700 mm width, 900 mm height, available lengths from 1000 to 2600 mm.

Product benefits

• Bespoke adaptation: several length ranges to adjust the workstation to layout requirements.
• Dedicated de-canning workstation: design intended for draining canned goods in perforated gastronorm containers.
• Easier can opener fitting: offset legs and 200 mm worktop offset.
• Enhanced hygiene: 304L stainless steel top, rounded edges and welded corners.
• Choice of capacity: configurations available to hold 2, 3 or 4 GN 1/1 containers.

Available options

• Bespoke rounded lower shelf (EGA7-10, EGA7-12, EGA7-14, EGA7-16, EGA7-18, EGA7-20, EGA7-22, EGA7-24): rounded lower shelf available depending on table length.
• Stainless steel adjustable feet (…/X): option to add 4 stainless steel adjustable feet to the reference.
• Stainless steel adjustable feet for lengths over 2200 mm (…/X): option to add 6 stainless steel adjustable feet to the relevant tables.
• Stainless steel castors (…/RX): option to add 4 Ø 125 mm stainless steel castors, including 2 with brakes.
• Stainless steel castors for lengths over 2200 mm (…/RX): option to add 6 Ø 125 mm stainless steel castors, including 2 with brakes.
• Polyamide castors (…/RP): option to add 4 Ø 125 mm polyamide castors, including 2 with brakes.
• Polyamide castors for lengths over 2200 mm (…/RP): option to add 6 Ø 125 mm polyamide castors, including 2 with brakes.
• Polyamide semi-mobile option (…/SMP): option to add polyamide castors without brakes and ABS adjustable feet.
• Stainless steel semi-mobile option (…/SMX): option to add stainless steel castors without brakes and stainless steel adjustable feet.
• Suspended consoles (TOP16): surcharge for 2 suspended consoles on a bespoke table.
• Semi-suspended consoles (TOP17): surcharge for 2 semi-suspended consoles on a bespoke table.
• Lower crossbars (TRAV): lower side and longitudinal crossbars, U-shaped or H-shaped to be specified when ordering. Option not available on suspended and semi-suspended versions.
• Welded legs (SPSOUD): option to weld the 4 legs to the support rails.
• Rear backsplash closure (TFD): rear backsplash closure available as an option.
• 300 mm high rear backsplash (TOP12): high rear backsplash available per linear metre, minimum 1 lm.
• Integrated side backsplash (TDL): 100 x 20 mm side backsplash integrated into the worktop, according to the planned dimensional limits.
• Rear stops (TTBA2): 2 AISI 304L stainless steel tube rear stops, with black ABS end caps and 35 mm space between backsplash and wall.
• Corner stops (TTCPC4): set of 4 rubber corner stops fitted to the table corners. For tables with backsplash, option TFD must also be provided.
• Rubber scraper/flap (OPBAV): rubber scraper or flap fixed to the table for clearing plates.
• Table without tap hole (SPST): configuration without tap hole available as an option.
• Table with 2 tap holes (SPBT): configuration with 2 tap holes available as an option.
• 20/10 worktop thickness (TOP11): 20/10 worktop thickness instead of 15/10, subject to feasibility.
• Post cut-out (TOP01): specific cut-out for post clearance, subject to feasibility.
• Special corner cut-out (TOP02): special corner cut-out, subject to feasibility.
• Right-angle worktop cut-out (TOP03): right-angle cut-out in the worktop, subject to feasibility.
• Cut corner (TOP04): cut corner option, subject to feasibility.
• Corner post cut-out with backsplash (TOP05): specific cut-out with backsplash, subject to feasibility.
• Post cut-out with backsplash (TOP06): cut-out for table with backsplash, subject to feasibility.
• Vibratory polished finish for table with backsplash (TOP10): vibratory polished finish available per linear metre, minimum 1 lm.
• Raised waste-disposal hole (TTVDC): raised waste-disposal hole with rubber rim, internal diameter 165 mm, subject to feasibility.
• Chrome tap hole cover (CT50): chrome tap hole cover available for the tap hole.